DPA 4011

DPA 4011

Stock	2 pcs
SERIAL #
LINK	https://www.dpamicrophones.com/pencil/4011-cardioid-microphone

Xem chi tiết
Ẩn thông tin
DPA 4011
• Directional patternCardioid
• Principle of operationPressure gradient
• Cartridge typePre-polarized condenser
• Frequency response20 Hz - 20 kHz
• Effective frequency range, ±2 dB, at 30 cm (11.8 in)40 Hz - 20 kHz
• Sensitivity, nominal, ±2 dB at 1 kHz10 mV/Pa; -40 dB re. 1 V/Pa
• Equivalent noise level, A-weightedTyp. 18 dB(A) re. 20 µPa (max. 20 dB(A))
• Equivalent noise level, ITU-R BS.468-4Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)
• Distortion, THD < 1%136 dB SPL RMS, 139 dB SPL peak
• Dynamic rangeTyp. 121 dB
• Max. SPL, THD 10%159 dB SPL peak
• Switchable attenuator, filters etc.0 dB / -20 dB
• Rated output impedance200 Ω
• Minimum load impedance2 kΩ
• Cable drive capability100 m (328 ft)
• Output balance principleImpedance balancing with Active Drive
• Common mode rejection ratio (CMRR)> 60 dB
• Power supply (for full performance)P48 (Phantom Power)
• Current consumption2.8 mA
• ConnectorXLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
• ColorMatte black
• Weight158 g (5.6 oz)
• Microphone diameter19 mm (0.75 in)
• Capsule diameter19 mm (0.75 in)
• Microphone length170 mm (6.7 in)
• Maximum output voltage, RMS> 5 V
• Polarity+V at pin 2 for positive sound pressure
• Temperature range-40°C to 45°C (-40°F to 113°F)
• Relative humidity (RH)Up to 90%
• Matching tolerance (frequency response and sensitivity)±1 dB
• Phase deviation for kit< 10°